Oxva Origin X Replacement Coils

Description

 Oxva Origin X Replacement Coils – UniCoil Series

Oxva Origin X Replacement Coils  engineered for the Origin X AIO pod mod. Available in four pre‑made resistances (0.2 Ω, 0.3 Ω, 0.5 Ω mesh for DTL/RDL and 1.0 Ω KA1 for MTL) plus an RBA deck for custom builds, these coils deliver rich flavour, quick ramp‑up and reliable performance across the Origin family.

Key Features

– UniCoil mesh technology – mesh heating element for fast heat‑up and intense flavour
– Four pre‑made resistances: 0.2 Ω, 0.3 Ω, 0.5 Ω (mesh) and 1.0 Ω (KA1 round wire)
– RBA option – dual‑post rebuildable deck for single‑coil DIY builds (5–40 W)
– Wide compatibility: Origin X, Origin Mini, Origin SE, Origin 2, Velocity LE and original Origin pods
– Friction‑fit installation – simple, tool‑free coil swaps
– Optimised for 5–60 W devices – matches the Origin X’s 5–60 W output range
– 5‑pack standard – cost‑effective replacement supply

Technical Specifications

| Specification | Details |
|—|—|
| Brand | Oxva |
| Coil Series | UniCoil (Origin X) |
| Pack Size | 5 coils |
| Resistance Options | 0.2 Ω mesh (DTL) – 0.3 Ω mesh (RDL) – 0.5 Ω mesh (RDL) – 1.0 Ω KA1 (MTL) – RBA (DIY) |
| Recommended Wattage | 0.2 Ω: 55–60 W – 0.3 Ω: 30–40 W – 0.5 Ω: 20–25 W – 1.0 Ω: 10–15 W – RBA: 5–40 W |
| Vaping Style | Direct‑to‑Lung (0.2/0.3/0.5 Ω) – Mouth‑to‑Lung (1.0 Ω) – DIY (RBA) |
| E‑liquid Recommendation | High‑VG (70%+) for 0.2/0.3/0.5 Ω – 50/50 PG/VG or salts for 1.0 Ω |
| Installation | Friction‑fit into Origin X pod |
| Contents | 5 × replacement coils (no pod, no e‑liquid) |

Compatible Devices

Use these coils in Oxva devices that accept UniCoil series coils, including:

– Origin X (60 W AIO pod mod)
– Origin Mini
– Origin SE
– Origin 2
– Velocity LE
– Original Origin (first‑gen AIO)

Note: The 0.2 Ω mesh coil is specifically recommended for Origin X due to its 55–60 W power band, but all UniCoil resistances work across the compatible devices when run within their rated wattage.

Which Resistance Should You Choose?

– 0.2 Ω mesh – Built for direct‑to‑lung vaping at high power. Delivers dense vapour, bold flavour and warm hits. Best run at 55–60 W with high‑VG freebase e‑liquids (e.g. 3–6 mg). Ideal for cloud‑chasing and flavour‑maximising sessions.
– 0.3 Ω mesh – Restricted direct‑lung sweet spot. Offers a balance of vapour, flavour and efficiency. Best run at 30–40 W with high‑VG or 70/30 freebase. Great for all‑day sub‑ohm vaping without excessive battery drain.
– 0.5 Ω mesh – Upper‑range RDL / lower‑range DTL. Cooler vapour and longer coil life. Best run at 20–25 W with 50/50 or 70/30 e‑liquids. Suitable for vapers transitioning from MTL to DTL.
– 1.0 Ω KA1 – Classic mouth‑to‑lung. Tight draw, cool vapour and efficient nicotine delivery. Best run at 10–15 W with 50/50 PG/VG or nicotine salts. Perfect for MTL purists and high‑nicotine users.
– RBA (rebuildable) – Dual‑post deck for single‑coil DIY builds. Allows custom wire, cotton and resistance tuning. Best for experienced vapers who want to tailor flavour, vapour and power (5–40 W).

How to Replace the Coil

1. Remove the pod from your Origin X device.
2. Turn the pod upside down and gently pull the old coil out from the base.
3. Insert the new coil, pressing firmly until it sits flush with the pod base.
4. Prime the coil by adding a few drops of e‑liquid onto the cotton wicking ports and letting the pod sit for 5–10 minutes.
5. Reinstall the pod, start at the lower end of the recommended wattage, and adjust up based on flavour and throat hit.

Expected Coil Life

With typical use and proper priming:

– 1.0 Ω: ~1–2 weeks for many MTL vapers
– 0.5 Ω: ~1–2 weeks
– 0.3 Ω: ~1–2 weeks
– 0.2 Ω: ~1–2 weeks, potentially shorter with very sweet dessert e‑liquids or chain vaping

Replace when you notice burnt taste, reduced flavour, or persistent gurgling that doesn’t resolve with wicking adjustments.

Why Buy From OzVapesAU

– 100% genuine Oxva coils – batch‑verified stock to avoid counterfeits
– Full UniCoil range – 0.2 Ω, 0.3 Ω, 0.5 Ω, 1.0 Ω and RBA in 5‑packs
– Fast Australia‑wide shipping – discreet packaging and tracked delivery
– Vaper‑focused support – guidance on wattage, e‑liquid pairing, and device compatibility
– Bundle discounts – save when you buy multiple packs or combine with pods/e‑liquid

Frequently Asked Questions

**Q: Do Origin X coils contain nicotine?**
A: No. These are nicotine‑free replacement heating elements; you add your own e‑liquid.

**Q: Will Origin X coils fit the original Origin pod?**
A: Yes. UniCoil series coils are cross‑compatible with the original Origin, Origin X, Mini, SE, Origin 2 and Velocity LE.

**Q: What wattage should I start at for 0.2 Ω?**
A: Begin around 55 W and adjust up to 60 W based on flavour and vapour production.

**Q: Can I use nicotine salts with the 0.2 Ω coil?**
A: You can, but it’s not recommended. The 0.2 Ω coil is designed for lower‑strength freebase e‑liquids at high wattage. For salts, use the 1.0 Ω coil at 10–15 W.

**Q: How do I know when to change the coil?**
A: Look for persistent burnt taste, weak flavour, or leaks/gurgling that don’t improve after priming and wicking checks.

**Q: Are these coils compatible with Caliburn or other brands?**
A: No. Origin X coils are specific to Oxva UniCoil family devices and are not cross‑compatible with Uwell, Vaporesso, or other brands.

Call‑to‑Action

Upgrade your Origin X setup today – grab a 5‑pack of genuine Oxva UniCoil coils in your preferred resistance and enjoy powerful DTL clouds or smooth MTL draws with fast OzVapesAU delivery.