Aspire BP60 replacement coils

Description

 Aspire BP60 Replacement Coils

Aspire BP60 replacement coils (and related BP-series) pod kits. Available in multiple resistances – 0.17 Ω and 0.3 Ω mesh for DTL, 0.6 Ω dual for RDL/MTL and 1.0 Ω for classic MTL – these press‑fit coils deliver strong flavour, reliable performance and simple swap‑outs in seconds. Each pack contains five coils.

Key Features

– **BP coil series** – purpose‑built for Aspire BP60, BP80, BP Stik, Onixx and Veynom kits.
– **Multiple resistances:** 0.17 Ω mesh, 0.3 Ω mesh, 0.6 Ω dual and 1.0 Ω Kanthal.
– **Press‑fit installation** – tool‑free, push‑to‑fit coil changes.
– **Mesh and dual options** – mesh for big flavour and clouds; dual/standard for efficient MTL.
– **5 coils per pack** – cost‑effective replacement supply.
– **Kanthal wire construction** – durable, consistent performance.
– **Wide e‑liquid compatibility** – high‑VG for sub‑ohm mesh; 50/50 or high‑PG for 0.6–1.0 Ω.

Technical Specifications

| Specification | Details |
|—|—|
| **Brand** | Aspire |
| **Coil Series** | BP (BP60/BP80/Onixx/Veynom) |
| **Pack Size** | 5 coils |
| **Resistance Options** | 0.17 Ω mesh – 0.3 Ω mesh – 0.6 Ω dual – 1.0 Ω Kanthal |
| **Recommended Wattage** | 0.17 Ω: 45–55 W – 0.3 Ω: 30–40 W – 0.6 Ω: 15–25 W – 1.0 Ω: 10–16 W |
| **Vaping Style** | DTL (0.17/0.3 Ω) – RDL/MTL (0.6 Ω) – MTL (1.0 Ω) |
| **E‑liquid Recommendation** | 70%+ VG for 0.17/0.3 Ω – 50/50 or high‑PG for 0.6/1.0 Ω |
| **Installation** | Press‑fit into BP pod |
| **Contents** | 5 × replacement coils (no pod, no e‑liquid) |
| **Origin** | China |

Compatibility by Resistance

**Important:** Not every resistance works in every device. Use the table below to match coils to your kit.

| Device | 0.17 Ω Mesh | 0.3 Ω Mesh | 0.6 Ω Dual | 1.0 Ω |
|—|—|—|—|—|
| **BP60** | ✅ | ✅ | ✅ | ✅ |
| **BP80** | ✅ | ✅ | ✅ | ❌ |
| **BP Stik** | ✅ | ✅ | ✅ | ✅ |
| **Onixx** | ❌ | ❌ | ✅ | ✅ |
| **Veynom LX / EX** | ✅ | ✅ | ✅ | ✅ |
| **Rhea X / Huracan / Nautilus Prime X** | ✅ (mesh) | ✅ | ✅ | ✅ |

Notes:
– 0.17 Ω and 0.3 Ω mesh are **not compatible** with the Onixx tank.
– 1.0 Ω is **not compatible** with the BP80.
– Always check your device’s manual for supported resistances and wattage ranges.

Which Resistance Should You Choose?

– **0.17 Ω mesh (45–55 W)** – For aggressive direct‑to‑lung vaping with high‑VG e‑liquids. Delivers intense flavour, warm hits and large vapour. Best for experienced sub‑ohm vapers on BP80, BP Stik, Veynom and similar high‑power devices.
– **0.3 Ω mesh (30–40 W)** – Sweet spot for DTL on the BP60 and BP80. Rich flavour and solid cloud production at moderate wattages. Ideal with 70%+ VG freebase e‑liquids (3–6 mg).
– **0.6 Ω dual (15–25 W)** – Versatile restricted DTL or mouth‑to‑lung. Balanced flavour and efficiency. Works well with 50/50 or high‑PG e‑liquids and higher nicotine strengths.
– **1.0 Ω Kanthal (10–16 W)** – Classic tight MTL. Cool vapour and efficient nicotine delivery. Perfect for nicotine salts or 50/50 high‑nicotine freebase.

How to Replace the Coil

1. Remove the pod from your BP60 (or compatible) device.
2. Turn the pod upside down and gently pull the old coil out from the base.
3. Insert the new coil, pressing firmly until it seats flush.
4. Prime the coil by adding a few drops of e‑liquid onto the cotton wicking ports and letting the pod sit for 5–10 minutes.
5. Reinstall the pod, start at the lower end of the recommended wattage, and adjust up based on flavour and throat hit.

Expected Coil Life

With typical use and proper priming:

– **1.0 Ω:** ~1–2 weeks for many MTL vapers
– **0.6 Ω:** ~1–2 weeks
– **0.3 Ω:** ~1–2 weeks
– **0.17 Ω:** ~1–2 weeks, potentially shorter with very sweet dessert e‑liquids or high‑wattage chain vaping

Replace when you notice burnt taste, reduced flavour, or persistent gurgling that doesn’t resolve with wicking adjustments.

Why Buy From OzVapesAU

– 100% genuine Aspire BP coils – batch‑verified stock to avoid counterfeits
– Full resistance range – 0.17 Ω, 0.3 Ω, 0.6 Ω and 1.0 Ω in 5‑packs
– Fast, discreet Australia‑wide shipping with tracking
– Expert guidance on coil compatibility, wattage and e‑liquid pairing
– Bundle discounts when buying multiple packs or combining with pods/e‑liquid

Frequently Asked Questions

**Q: Do BP60 coils contain nicotine?**
A: No. These are nicotine‑free replacement heating elements; you add your own e‑liquid.

**Q: Which coil is best for the BP60?**
A: The BP60 supports 0.3 Ω mesh, 0.6 Ω dual and 1.0 Ω. For DTL, choose 0.3 Ω; for MTL, choose 0.6 Ω or 1.0 Ω.

**Q: Can I use 0.17 Ω coils in my BP60?**
A: Yes, the BP60 supports 0.17 Ω mesh. Ensure your device can deliver 45–55 W and use high‑VG e‑liquid.

**Q: Are BP coils compatible with Onixx?**
A: Only 0.6 Ω and 1.0 Ω BP coils work with Onixx. The 0.17 Ω and 0.3 Ω mesh coils are not compatible.

**Q: What e‑liquid should I use with 0.3 Ω mesh?**
A: High‑VG (70%+) freebase e‑liquid, typically 3–6 mg, for best flavour and coil life.

**Q: How do I know when to change the coil?**
A: Look for persistent burnt taste, weak flavour, or leaks/gurgling that don’t improve after priming and wicking checks.

Call‑to‑Action

Keep your Aspire BP60 performing at its best. Grab a 5‑pack of genuine Aspire BP replacement coils in your preferred resistance and enjoy consistent flavour and vapour with fast OzVapesAU delivery.