Description

Vaporesso XROS Pod Cartridge – COREX 3.0 Version (2 ml)

Vaporesso XROS replacement pods featuring COREX 3.0 technology in a 2 ml TPD‑compliant capacity. With an integrated mesh coil (0.4 Ω, 0.6 Ω, 0.8 Ω, 1.0 Ω or 1.2 Ω depending on variant), top‑fill design and SSS anti‑leak structure, these pods deliver richer flavour, smoother draws and longer coil life across the full XROS device family. Sold in 4‑packs for cost‑effective upkeep.

Key Features

– **COREX 3.0 heating technology** – advanced mesh coil structure for faster, more even heat distribution and enhanced flavour.
– **2 ml e‑liquid capacity** – TPD‑compliant size ideal for UK/EU markets and daily carry.
– **Multiple resistances:** 0.4 Ω (DTL/high power), 0.6 Ω (RDL), 0.8 Ω (MTL/RDL), 1.0 Ω (MTL) and 1.2 Ω (tight MTL).
– **Top‑fill system** – easy, spill‑resistant refilling by removing the drip tip.
– **SSS leak‑resistant design** – sealed structure helps prevent leaks during transport and daily use.
– **Integrated mesh coil** – no separate coil changes; replace the whole pod when the coil wears out.
– **4 pods per pack** – economical replacement supply.
– **Full XROS compatibility** – works across XROS 2/3/4/5/6, Mini/Nano/Pro/Cube and other XROS series devices (with resistance/power limits noted below).

Technical Specifications

Compatible Devices

These 2 ml COREX 3.0 pods are compatible with the full Vaporesso XROS family, including:

– XROS 6, XROS 6 Mini, XROS 6 Nano
– XROS 5, XROS 5 Mini, XROS 5 Nano
– XROS 4, XROS 4 Mini, XROS 4 Nano
– XROS 3, XROS 3 Mini, XROS 3 Nano
– XROS 2, XROS, XROS Mini, XROS Nano
– XROS Pro, XROS Pro 2
– XROS Cube

Important resistance notes:

– **0.4 Ω pods** are only supported on newer, higher‑power devices such as XROS 4/4 Mini/4 Nano, XROS 5/5 Mini/5 Nano, XROS Pro and XROS Pro 2. They will not work correctly on older/low‑power XROS, XROS 2 or XROS 3 series that don’t support 0.4 Ω / ~30 W.
– **0.6–1.2 Ω pods** work across the entire XROS range for MTL and RDL styles.

Which Resistance Should You Choose?

– **0.4 Ω (DTL)** – For direct‑to‑lung vaping with high‑VG e‑liquids. Delivers big vapour and bold flavour at 25–30 W. Only for XROS 4/5/Pro/Pro 2 and other 30 W‑capable devices.
– **0.6 Ω (RDL)** – Restricted direct‑lung sweet spot. Balanced flavour and vapour at 20–23 W. Works well with 50/50 or 70/30 e‑liquids.
– **0.8 Ω (MTL/RDL)** – Versatile all‑rounder. Tighter draw for MTL with nic salts or 50/50, or slightly open RDL at 15–18 W. Great for flavour and efficiency.
– **1.0 Ω (MTL)** – Classic tight mouth‑to‑lung. Best with nicotine salts or higher‑strength 50/50 e‑liquids at 10–13 W. Perfect for ex‑smokers and all‑day MTL.
– **1.2 Ω (tight MTL)** – Very cigarette‑like draw with low power. Ideal for high‑strength nic salts and vapers who want minimal vapour and maximum throat hit at 8–12 W.

How to Fill & Use

1. **Remove the drip tip** from the pod to expose the fill port.
2. **Insert your e‑liquid bottle nozzle** and gently squeeze to fill up to the 2 ml mark (avoid overfilling).
3. **Replace the drip tip** firmly, ensuring a snug seal.
4. **Prime the pod** by letting it sit for 5–10 minutes after filling before first use.
5. **Insert the pod** into your XROS device, set the appropriate wattage for the resistance, and vape.

Replace the pod when you notice burnt taste, reduced flavour or persistent gurgling that doesn’t improve with priming.

Expected Pod Life

With typical use and proper priming:

– **1.2 Ω / 1.0 Ω / 0.8 Ω:** ~1–2 weeks for many MTL vapers
– **0.6 Ω:** ~1–2 weeks
– **0.4 Ω:** ~1–2 weeks, potentially shorter with very sweet dessert e‑liquids or high‑wattage chain vaping

Lifespan varies with e‑liquid sweetness, PG/VG ratio, wattage and puff frequency.

Why Buy From OzVapesAU

– 100% genuine Vaporesso pods with batch verification
– Full COREX 3.0 range – 0.4 Ω, 0.6 Ω, 0.8 Ω, 1.0 Ω and 1.2 Ω in 2 ml TPD size
– Fast, discreet Australia‑wide shipping with tracking
– Expert advice on resistance, wattage and e‑liquid pairing for your XROS device
– Bundle savings when buying multiple 4‑packs or combining with XROS kits and e‑liquid

Frequently Asked Questions

**Q: Are these 2 ml pods compatible with my XROS device?**
A: Yes. COREX 3.0 2 ml pods work with all Vaporesso XROS series devices, but 0.4 Ω is only supported on newer high‑power models (XROS 4/5/Pro/Pro 2 and their Mini/Nano variants).

**Q: What’s the difference between 2 ml and 3 ml XROS pods?**
A: The main difference is capacity: 2 ml is TPD‑compliant for UK/EU markets, while 3 ml is for regions without that limit. Both use the same COREX 3.0 technology and fit the same devices.

**Q: Can I use 0.4 Ω pods in my older XROS?**
A: No. 0.4 Ω pods require devices that support ~30 W and 0.4 Ω resistance (XROS 4/5/Pro/Pro 2 series). Older/low‑power XROS, XROS 2 and XROS 3 models should use 0.6 Ω and above.

**Q: Do I need to change the coil separately?**
A: No. The coil is integrated into the pod. When the coil wears out, you replace the entire pod.

**Q: How do I prevent leaks?**
A: Use the top‑fill correctly (don’t overfill), prime new pods properly, store the device upright when possible, and ensure the drip tip is firmly seated.

**Q: Are these pods nicotine‑free?**
A: The pods themselves contain no nicotine; you add your own e‑liquid (nicotine or nicotine‑free).

Call‑to‑Action

Upgrade your XROS setup with genuine 2 ml COREX 3.0 pods from OzVapesAU – choose your preferred resistance, enjoy richer flavour and longer pod life, and get fast, discreet Australia‑wide delivery.

Vaporesso XROS Pod Cartridge Corex 3.0 Version 2ml

Description